Zalecenia producenta dotyczące prania, suszenia i przechowywania. Zawsze obowiązuje etykieta na produkcie.
praní, sušení a skladování
Rinse helmets in clean, fresh water after each use to help reduce odour, corrosion or degradation of materials. The liner in a Shuck helmet can be removed and machine washed on a 30 °C cycle. Drip dry helmets out of sunlight and away from heat sources. Frequent forced drying in drying rooms will shorten the lifespan of the foam inserts and parts. Store helmets upright on a shelf out of sunlight. Do not hang helmets from the chin strap. Do not store helmets wet or damp. Avoid stacking your helmets, as sustained compression can damage the shell.
Ten tekst jest dostępny tylko w języku: angielski.
Źródło: palm.equipment
značení a chemie
You can identify your helmets with a permanent marker or self-adhesive stickers. We advise against the use of solvents and strong cleaning agents to remove pen marks. Do not use paint as it can react with the shell material. Popular sticky mounts, for cameras and lights, will not affect the shell material, but attach them at your own risk; their effect on the helmet is not covered by warranty.
Ten tekst jest dostępny tylko w języku: angielski.
Źródło: palm.equipment
kontrola a po nárazu
Make a visual check each time you fit your helmet. Should the shell sustain significant impact, for example resulting in deep abrasion or gouges, then the helmet should be retired from use. Repeated low level impacts, such as being dropped onto hard surfaces, can result in white marks on the inside of the shell. Tests show these would be unlikely to result in the shell not performing to the ISO standard, but you should consider the age, amount of use and extent of any damage. Significant bleaching of colour of the shell through UV exposure is an indicator that the plastic may be degraded and the helmet should be retired. Also check foam fit, EPP liner (retire if damaged or deformed), buckles, straps, cradle and that the shell is not misshapen, dented or cracked. Do not remove the foam liner attached to the shell.
Ten tekst jest dostępny tylko w języku: angielski.
Źródło: palm.equipment
životnost
Palm AP2000 and AP4000 helmets have a maximum lifespan of 10 years; Palm Shuck helmets have a maximum lifespan of 5 years from date of purchase, after which they must be retired regardless of condition. Indicative lifespan by use is the same scale as for Palm PFDs (unused 10 years; light 5 years+; medium 3–5; heavy 2–3; intense 1–2 years). All helmet plastic degrades with time and use.
Ten tekst jest dostępny tylko w języku: angielski.
Źródło: palm.equipment
skladování a nepřátelé výstroje
The enemies of long-lived gear are grit, thorns and other sharp things; sunlight (ultraviolet); mud and damp; and saltwater corrosion. Rinse your gear in fresh water after you’ve used it. Put your gear away dry. Avoid leaving your gear in the sun too long. Hang your gear up in a dry, well-ventilated place. If you aren’t able to hang your gear up, avoid stacking things on top, or folding zips, foam or neoprene (left this way for a long time they can become compressed and creased).
Ten tekst jest dostępny tylko w języku: angielski.
Źródło: blog.palm.equipment